|
It is currently Sun Nov 24, 2024 12:06 am
|
View unanswered posts | View active topics
 |
|
 |
|
| Author |
Message |
|
Dookie
|
Post subject: Car stereo documentation  Posted: Mon Nov 16, 2009 12:27 pm |
|
|
|
Just so I have a place where I can remember everything I've done to my car for quick reference in the future.
Deck: Pioneer FH-P8000BT
14W RMS x 4
6-channel, 4-volt preamp outputs (front, rear, subwoofer)
CD, MP3, USB, etc.
($120, used)
Front: Infinity Reference 6022i
Sensitivity: 93.4 dB at 2.83 volts, 87.5 dB at 1 watt
Power: 2-60 W RMS
Impedance: 2 Ohms (though some places say 4-Ohms, but it looks like a typo)
($25, used)
Rear:
Sensitivity: 95 dB at 2.83 volts
Power: 2-110 watts RMS
Impedance: 2 Ohms
($90-something, new on eBay)
Sub:
Single Voice Coil, 4-Ohms
Hexagonal shape
500 W RMS handling
Sensitivity: 87.5 dB 1W/1m
($80, super used, crappy box, glued cone)
Sub Enclosure:
3/4" MDF
1.5 cu ft
Stuffed with approx 2.1 lbs polyfill (Walmart)
Pink super-sheer material used to prevent polyfill from blowing out port. (Walmart)
($42, new for box)
Sub Amp: Power Acoustik OV2-820
2 x 180 Watt RMS - 4 Ohm - 2 channel
2 x 230 Watt RMS - 2 Ohm - 2 channel
1 x 460 Watt RMS - 4 Ohm - 1 channel (bridged)
($120 or so new, plus wires, install, etc.)
|
|
|
|
|
 |
|
Ghost of Nap
|
Post subject: Re: Car stereo documentation Posted: Mon Nov 16, 2009 5:25 pm |
|
|
|
|
|
|
|
|
Dookie
|
Post subject: Re: Car stereo documentation Posted: Mon Nov 16, 2009 6:19 pm |
|
|
|
Yeah! Isn't it sad? Now I'm thinkin I need a 4-channel amp. But I reaaaallllly don't wanna install it. It's going to be a MAJOR pain in the butt.
Many thanks to sinsear, Nap, and LEC for helping me with various aspects of the installation(s).
Also, thanks to Sound Warehouse for installing the amp originally. I definitely paid for their services, but they did a great job and have since hooked me up with free fuses and splices when I've been back there for miscellaneous help.
|
|
|
|
|
|
|
Ghost of Nap
|
Post subject: Re: Car stereo documentation Posted: Tue Nov 17, 2009 12:30 am |
|
|
|
If you do decide on a 4-channel amp, I will gladly help with the install (assuming it is after finals are done). YOu can also use my garage for the project, or any other project you got.
|
|
|
|
|
|
|
Dookie
|
Post subject: Re: Car stereo documentation Posted: Tue Nov 17, 2009 11:53 am |
|
|
|
Sweet! U rock, dude! Thanks!
Can we rename your garage to "The Projects"?
|
|
|
|
|
|
|
Ghost of Nap
|
Post subject: Re: Car stereo documentation Posted: Tue Nov 17, 2009 11:56 am |
|
|
|
|
|
|
|
|
Dookie
|
Post subject: Re: Car stereo documentation Posted: Tue Nov 17, 2009 2:37 pm |
|
|
|
Sweet! Now I can say that I'm "going to go volunteer at The Projects"!
|
|
|
|
|
|
|
Sinsear
|
Post subject: Re: Car stereo documentation Posted: Tue Nov 17, 2009 7:30 pm |
Joined: Thu Sep 17, 2009 1:45 pm
Posts: 10
|
|
New speaker spacers built and ready for install.
|
|
|
|
|
|
Dooks
|
Post subject: Re: Car stereo documentation Posted: Wed Nov 18, 2009 11:34 am |
|
|
|
|
|
|
|
|
Dookie
|
Post subject: Re: Car stereo documentation Posted: Thu Jul 15, 2010 9:45 am |
|
|
|
BUMP!
The Xtant's cone started separating from the surround. I noticed because my bass output seemed kind of low for what it normally is. Last night I took some Gorilla Glue to it (with the help of mi padre). Haven't tested it yet (had to wait for the glue to cure), but I suspect that this sub's life is now pretty limited.
Time to begin the hunt again. I'd like to use the same box if possible, so I'm scoping out some other 12s.
|
|
|
|
|
|
|
|
 |
|
 |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
