| T E A M W O R M . org https://wuddawaste.com/forum/ |
|
| Car stereo documentation https://wuddawaste.com/forum/viewtopic.php?f=6&t=362 |
Page 1 of 2 |
| Author: | Dookie [ Mon Nov 16, 2009 12:27 pm ] |
| Post subject: | Car stereo documentation |
Just so I have a place where I can remember everything I've done to my car for quick reference in the future. Deck: Pioneer FH-P8000BT 14W RMS x 4 6-channel, 4-volt preamp outputs (front, rear, subwoofer) CD, MP3, USB, etc. ($120, used) Front: Infinity Reference 6022i Sensitivity: 93.4 dB at 2.83 volts, 87.5 dB at 1 watt Power: 2-60 W RMS Impedance: 2 Ohms (though some places say 4-Ohms, but it looks like a typo) ($25, used) Rear: Sensitivity: 95 dB at 2.83 volts Power: 2-110 watts RMS Impedance: 2 Ohms ($90-something, new on eBay) Sub: Single Voice Coil, 4-Ohms Hexagonal shape 500 W RMS handling Sensitivity: 87.5 dB 1W/1m ($80, super used, crappy box, glued cone) Sub Enclosure: 3/4" MDF 1.5 cu ft Stuffed with approx 2.1 lbs polyfill (Walmart) Pink super-sheer material used to prevent polyfill from blowing out port. (Walmart) ($42, new for box) Sub Amp: Power Acoustik OV2-820 2 x 180 Watt RMS - 4 Ohm - 2 channel 2 x 230 Watt RMS - 2 Ohm - 2 channel 1 x 460 Watt RMS - 4 Ohm - 1 channel (bridged) ($120 or so new, plus wires, install, etc.) |
|
| Author: | Ghost of Nap [ Mon Nov 16, 2009 5:25 pm ] |
| Post subject: | Re: Car stereo documentation |
14w RMS? really? |
|
| Author: | Dookie [ Mon Nov 16, 2009 6:19 pm ] |
| Post subject: | Re: Car stereo documentation |
Yeah! Isn't it sad? Now I'm thinkin I need a 4-channel amp. But I reaaaallllly don't wanna install it. It's going to be a MAJOR pain in the butt. Many thanks to sinsear, Nap, and LEC for helping me with various aspects of the installation(s). Also, thanks to Sound Warehouse for installing the amp originally. I definitely paid for their services, but they did a great job and have since hooked me up with free fuses and splices when I've been back there for miscellaneous help. |
|
| Author: | Ghost of Nap [ Tue Nov 17, 2009 12:30 am ] |
| Post subject: | Re: Car stereo documentation |
If you do decide on a 4-channel amp, I will gladly help with the install (assuming it is after finals are done). YOu can also use my garage for the project, or any other project you got. |
|
| Author: | Dookie [ Tue Nov 17, 2009 11:53 am ] |
| Post subject: | Re: Car stereo documentation |
Sweet! U rock, dude! Thanks! Can we rename your garage to "The Projects"? |
|
| Author: | Ghost of Nap [ Tue Nov 17, 2009 11:56 am ] |
| Post subject: | Re: Car stereo documentation |
Sure! |
|
| Author: | Dookie [ Tue Nov 17, 2009 2:37 pm ] |
| Post subject: | Re: Car stereo documentation |
Sweet! Now I can say that I'm "going to go volunteer at The Projects"! |
|
| Author: | Sinsear [ Tue Nov 17, 2009 7:30 pm ] |
| Post subject: | Re: Car stereo documentation |
New speaker spacers built and ready for install. |
|
| Author: | Dooks [ Wed Nov 18, 2009 11:34 am ] |
| Post subject: | Re: Car stereo documentation |
Sinsear, you are the MAN! Self: I'm looking into this. After I get my door fixed, call this guy. http://www.ksl.com/index.php?nid=218&ad ... =1&cat=556 |
|
| Author: | Dookie [ Thu Jul 15, 2010 9:45 am ] |
| Post subject: | Re: Car stereo documentation |
BUMP! The Xtant's cone started separating from the surround. I noticed because my bass output seemed kind of low for what it normally is. Last night I took some Gorilla Glue to it (with the help of mi padre). Haven't tested it yet (had to wait for the glue to cure), but I suspect that this sub's life is now pretty limited. Time to begin the hunt again. I'd like to use the same box if possible, so I'm scoping out some other 12s. |
|
| Page 1 of 2 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|